Skip links
Levelling Feet

How to Position Levelling Feet Under Long Conveyors and Machinery Frames

Correctly positioning levelling feet is just as important as choosing their load capacity.

Long conveyors and machinery frames can bend, twist or distribute weight unevenly when supports sit in the wrong locations. A well-designed support layout places feet where loads enter the structure, controls unsupported spans and maintains sufficient access for adjustment, cleaning and inspection.

Product Line Contact

How to Position Levelling Feet Under Long Conveyors and Machinery Frames

A long conveyor does not behave like a rigid block.

The frame carries its own weight together with motors, belt or chain systems, product, guarding, transfer equipment, sensors and other accessories. Some loads spread evenly along the structure, while others concentrate substantial weight at individual points.

Because of this, simply placing levelling feet for conveyors at equal distances does not always create the strongest support arrangement.

Correct positioning starts by understanding where loads enter the frame, how the structure bends between supports and what happens when the floor is not perfectly level.

ISO 12100 remains the current international framework for machinery risk assessment in 2026 and requires designers to consider hazards throughout machinery design, installation and use. Support stability therefore belongs within the overall machine-design process rather than being treated as a final accessory decision.

Start with the load path

Every conveyor has a load path.

Weight moves from the belt, rollers, processing modules and frame members into the supporting legs. Those legs transfer the forces through the levelling feet and finally into the factory floor.

Good support positioning keeps that path short and predictable.

For example, a heavy geared motor at the drive end can create a much larger local reaction than an empty section of conveyor frame. A filling station, hopper or transfer module may generate another concentrated load farther along the line.

Placing a foot close to these areas can reduce bending in the structural frame.

Long unsupported sections work differently. Even when the load remains relatively uniform, the frame can deflect between support points. Increasing the distance between feet generally increases the structural demand on beams and side rails.

Therefore, support spacing should follow frame stiffness and load distribution, not a universal distance rule.

Where should levelling feet normally be positioned?

A useful engineering starting point involves locating supports:

  • near the drive and return ends;
  • below heavy motors or gearboxes;
  • close to transfer points between conveyors;
  • beneath hoppers, tanks or processing modules;
  • near structural frame joints;
  • close to significant changes in frame geometry;
  • along long spans where deflection needs control;
  • far enough from edges to maintain stable floor contact;
  • where technicians can still reach the adjustment mechanism.

Equal spacing may work for simple uniform structures, but machinery often requires additional support near concentrated loads.

Four, six or more feet?

Adding more levelling feet does not automatically create better support.

Three contact points naturally define a plane. Once machinery uses four, six or eight adjustable supports, small differences in adjustment height or floor flatness can change how much weight each foot carries.

One foot may carry almost no load while another becomes overloaded.

This effect becomes especially important on long frames because the structure itself can flex.

An initial estimate can divide total vertical load by the number of feet:

Average load per foot = total working load ÷ number of supports

However, engineers should not assume that this average equals the maximum real reaction.

Drive assemblies, uneven product loading, floor variation and structural flexibility can shift the load toward individual supports.

Comparison of typical support layouts

Support layout Main advantage Main challenge Suitable application
4 levelling feet Simple adjustment and predictable setup Longer unsupported spans Compact machinery
6 levelling feet Better support for longer frames Requires careful height adjustment Medium-length conveyors
8+ levelling feet Controls long spans and local loads Uneven adjustment can create load imbalance Long conveyors and modular lines
Feet concentrated near heavy components Reduces local structural stress Layout becomes less symmetrical Conveyors with motors, hoppers or process modules
Evenly distributed feet Simple frame layout May not follow actual load distribution Uniform lightweight structures

The correct arrangement therefore comes from the complete machine structure rather than from a fixed rule about how many feet a conveyor should have.

Usage: support the machine where the load occurs

Consider a long conveyor carrying relatively light packages.

Most of the structure may experience a nearly uniform load. At the drive end, however, the motor and gearbox can create a significant concentrated mass.

Placing the nearest pair of supports too far away forces the frame to behave like a cantilever between the feet and drive unit.

Moving those supports closer to the heavy assembly shortens the load path and can reduce local bending.

A similar principle applies beneath weighing modules, inspection systems and process stations.

Machine builders should also consider operating loads rather than only the empty conveyor. Product accumulation can substantially increase weight within one zone, especially when a downstream machine stops.

Frame deflection matters

Levelling feet provide stable support only when the frame between them remains sufficiently rigid.

Excessive deflection can affect:

  • belt or chain tracking;
  • roller alignment;
  • transfer heights;
  • sensor positioning;
  • guarding alignment;
  • product flow;
  • bearing and shaft alignment.

Small structural movements may become noticeable over several metres of conveyor.

Rather than solving every issue by adding another foot, engineers should evaluate both support spacing and frame section stiffness.

A stronger beam may sometimes offer a better solution than increasing the number of floor contact points.

Experience: more feet can make levelling harder

Installation teams often discover an important practical issue: every additional support requires adjustment.

Imagine a six-metre frame with eight feet.

If installers extend all eight until they simply touch the floor, the machine may appear stable. Yet one support can still carry a disproportionate load because the floor varies by only a few millimetres.

Experienced installation therefore involves adjusting the conveyor progressively.

Start by establishing the machine height and longitudinal level. Next, bring intermediate supports into firm contact without forcing the frame upward. Finally, verify stability and recheck alignment after the machine carries its operating load.

Reinspection after commissioning can identify settling or movement that occurred during initial operation.

Centre of gravity and lateral stability

Support placement also affects resistance to tipping.

Feet positioned farther apart generally create a larger support polygon. Keeping the machine’s projected centre of gravity well inside that polygon improves static stability.

Narrow conveyor frames deserve particular attention when tall guards, control cabinets or process modules raise the centre of gravity.

Lateral loads can arise from belt tension, product impacts or operators interacting with machinery.

ISO 12100 requires machinery designers to identify hazards and assess risks across reasonably foreseeable operating conditions. Stability should therefore consider more than vertical weight alone.

Industries: different conveyors create different support requirements

Food-processing conveyors often combine long stainless frames with motors, washdown systems, product guides and processing equipment.

Meat and poultry lines may carry substantial product loads. Seafood machinery can combine wet environments with salt exposure, while dairy and beverage systems frequently require aggressive cleaning.

Packaging conveyors often prioritise alignment because small height differences can disturb transfers between machines.

Pharmaceutical, biotechnology and cosmetics production adds requirements for cleanability and controlled environments.

Long conveyors in general manufacturing may carry significantly heavier components, creating larger structural reactions even when hygienic design plays a smaller role.

Each industry changes the support calculation, but the same principle remains: place the support where the structure needs it.

Material: stainless steel and the washdown environment

For food-processing conveyors, support design also affects hygiene.

3-A Sanitary Standards maintains 3-A 88-01 – Machine Leveling Feet and Supports, specifically addressing components that support equipment from the floor in food and dairy processing environments.

Its scope reflects an important point: feet are not usually product-contact surfaces, but they can still collect soil and contribute to secondary contamination when poorly designed.

Stainless steel therefore serves more than an aesthetic purpose.

Grades such as 304 and 316 commonly appear in food-processing equipment. BSSA notes that 316 generally provides greater corrosion resistance than 304, particularly where chloride exposure becomes more severe. Surface condition and smooth geometry also influence cleanability and corrosion performance.

Material choice should match detergents, disinfectants, temperature and exposure to salts rather than relying simply on the description “stainless steel.”

Hygienic positioning also means leaving cleaning access

Support feet should not sit where they create inaccessible pockets beneath the conveyor.

Adequate spacing between neighbouring structural members allows cleaning teams to reach the floor, foot base and surrounding frame.

Current ISO 14159 remains the published machinery-hygiene standard, while a revised second edition is under development in 2026. The draft defines cleanable machinery around the ability to remove soil and specifically addresses crevices, dead spaces and hygienic construction.

A technically strong support arrangement should therefore combine structural requirements with access for sanitation.

Expertise: calculate local reactions, not only total weight

For straightforward conveyors, dividing the total weight among supports can provide an early sizing estimate.

Complex machinery requires more.

Engineers should consider the weight of the frame, maximum product load, drive system, accessories and any process equipment. Dynamic effects from starting, stopping and product impact may also influence the design.

Long or heavily loaded structures can justify structural calculations or finite-element analysis before the final support locations are fixed.

Each selected foot should then have adequate capacity for its maximum expected local reaction, including an appropriate design margin.

The objective is not merely to prevent failure.

Good engineering also limits frame distortion and keeps the conveyor aligned.

Authoritativeness and Trustworthiness

Certified hygienic components give OEMs documented evidence that important design criteria have undergone independent evaluation.

NHK Group currently holds EHEDG Certificate EHEDG-C2400039, Type EL Class I AUX, for specified machine shoe families with base plates and NBR gaskets. The certificate was issued in September 2024 and is listed as valid through 31 December 2026.

EHEDG explains that certified equipment passes an evaluation process and that certificates identify the exact product, sizes, seal materials, certification class and validity period.

For hygienic applications, designers can also refer to 3-A 88-01 Machine Leveling Feet and Supports when determining sanitary requirements for floor-supported machinery.

Certification does not determine how many feet a conveyor needs. Structural layout still belongs to the machinery designer.

It does, however, strengthen confidence that the selected support component follows recognised hygienic-design principles.

Innovation brought to life

The most effective levelling-foot layout often looks simple after installation.

That simplicity comes from engineering decisions made much earlier.

Designers map concentrated loads, control unsupported spans, consider the centre of gravity, provide enough adjustment range and preserve cleaning access. Modern CAD and structural analysis can further optimise support positions before steel fabrication begins.

NHK Group levelling feet for conveyors can then become part of a complete machinery-support strategy rather than an item added at the end of the project.

Correct placement improves more than stability.

It can support alignment, reduce unnecessary frame stress, simplify installation and help preserve hygienic access beneath processing equipment.

Innovation brought to life begins at floor level: put each levelling foot where the machine actually needs support, and the entire conveyor can perform from a stronger foundation.

Hygienic certified machine leveling feet and castor with stainless steel brackets and spindles
Hygienic conveyor parts in stainless steel

Contact

    Articles